Browsing Livestock Systems by Author "Upton, J."
Effects of simulated quarter and udder teat cup removal settings on strip milk and milking duration in dairy cowsBoloña, P. Silvia; Upton, J.; Reinemann, D. J.; Teagasc Walsh Fellowship Programme; University of Wisconsin-Madison (Elsevier, 2020-02-26)The aim of this study was to estimate the amount of milk left in quarters and udders and the milking duration for a variety of teat cup removal strategies. A combination of empirical data and simulated quarter and udder teat cup removal settings were used to make these estimates. Milking duration is an important factor in both automatic and conventional milking systems because it directly influences milking efficiency and hence can affect farm profitability. Strategies investigated in the literature to reduce milking duration include the application of different milk flow rate switch-points (milk flow rate at which the milking unit or teat cup is removed). Applying these milk flow rate switch-points can affect the amount of milk that is not harvested (strip milk). We are not aware of previous research analyzing strip milk yield and milking duration at the quarter level, across a range of quarter and udder milk flow rate switch-points. Quarter-level average milking duration decreased by 2 min, and strip milk increased 1.3 kg as quarter milk flow rate switch-point was increased from 0.2 kg/min to 1.0 kg/min. Using an end of milking criterion of removal of the teat cup at 50% of the quarter's rolling average milk flow rate resulted in a 0.4-min reduction in milking duration and a 0.08-kg increase in strip milk per quarter, compared with removal of the teat cup at 30% of the quarter's rolling average milk flow rate. Udder-level average milking duration decreased by 1.4 min, and strip milk increased by 0.76 kg (0.19 kg per quarter) as udder milk flow rate switch-point was increased from 0.2 kg/min to 1.0 kg/min. A 0.8-min reduction in cow milking duration and a 0.27-kg increase in strip milk at the udder level (0.08 kg per quarter) resulted when changing udder milk flow rate switch-point from 30% of the udder rolling average to 50% of the udder rolling average milk flow rate. This study provides quantitative estimates of the effect of teat cup milk flow rate switch-points on milking duration and strip milk yield.